BMW M3 E36 (previously tuned by DA motorsport)
NEW !
Engine running, no trigger errors, occasional missfire, very rough idle, BUT
At 2500rpm it just cuts the fuel, or spark (could not establish whitch one) and just dies (does not respond to gas pedal at all.
Today i upgraded it to 1.1.27 (dont know why) and started the config from the beginning, including the VE and Spark tables...
Now it manages to reach 3700rpm and again just drop dead.
Also i have issues with terminal communication, could not manage to get "normal" respond to mll command, just some unrecognizable raw data )}}}}}@@@@ etc...
What could i be doing wrong ?
Did i corrupt the firmware somehow ?
Engine:
- S50 3.2l inline six
- CP Pistons 87mm 8,5:1
- Garrett GT3582R
- stock cams, vanos removed
- DA exhaust manifold, M50 intake manifold
Genboard v3.3 1.1.26 firmware
- 60-2 crank wheel, VR sensor
- hall camsync not used
- 1000cc rochester injectors (lowZ series resistors 30v flyback)
- 4bar map
- Dual out COP ignition
Thanks to Jason Voytilla for His msq file :) it helped me start it...