Turbo Setup
System Definitions
- Trigger type: VR 60-2 setup std VW crank sensor
- Second Trigger avail cam 1 window hall sensor .. Not used
- Fuel Injection:
- Batch
- Stock 1.8T injectors 48 psi, 10-11ohm injectors
- Ignition type
- Wasted Spark
- or Coil on plug
- Oxygen Sensor
- WBO2 -- VW LSU4
- Map sensor type std
- Coolant sensor type bosch
- Intake Air Temp Sensor GM
Startup stuff
- Fuel Pump control -- Not required for car using stock FP
- Priming Pulse -- using default
- Crank Pulse Definition -- using default
- Afterstart enrichment (choke) -- using default
- Warmup Definitions -- using default
- Fast idle -- using default
- IAC type and setup -- using default
Engine Running Definitions
- Rev limiter -- 8000 RPM redline
- accelerator pump based on rate of change of TPS -- using default
- deceleration fuel cut -- using default
- Temp Coolant turn on temp Not used using stock one in car
- Knock setup -- Still to check if boards are populated then calculate
- EGO configuration for WBO2 sensor -- Need source
- WBO2 configuration for WBO2 sensor -- Need source and calibrate
Tuning Parameters
- VE learning
- LCD setup
- Keyboard Setup
Advanced Options
- WOT switch at an RPM threshold -- Used for nitrous activation
- WOT switch
- RPM switch at RPM threshold used for shift light
- RPM switch output channel selector --I could use some help here