System Setup Checklist
This checklist is broken into xx major sections
- Genboard hookup/modifications
- Engine monitoring sensors
- WBO2 setup
- Trigger setup (coil or multitooth)
- Injector setup
- Ignition setup
- System Test
- Final calibrations
- test start
- Advanced Features (shiftcut/ALS/WOT actuators)
- tuning advice
Genboard hookup/modifications
[ ] GenBoard assembled see StepByStepGuide
Engine monitoring sensors
- [ ] Battery Calibration (AREF setup)
- [ ] IAT/MAT
- [ ] CLT
- [ ] MAP (kpafac)
WBO2 Setup
[ ] WBO2
- [ ] nernst_taget adjustment
- [ ] pump_zero check/adjust (advanced or from email)
- [ ] Free air calibration
Trigger Setup
[ ] Multitooth
- [ ] Primary Trigger setup
- Optional for wasted spark/required sequential Ignition
- [ ] Secondary Trigger setup
[ ] Coil
- [ ] Number of clynders
- [ ] Rising Edge
- OR
- [ ] Trailing edge