Nitrous control
As many of us using big turbos (especially me :), it's a good idea to spool it with nitrous injection.
Unlike with other technics (launch and ALS), I'd like control it a way to stay in traction which is much favourable in street conditions.
My first idea is a dry kit with PWM-able solenoid, like this one:
http://www.noswizard.com/product_desc.php?id=6
Interesting part is controlling such a system with VEMS.
I thought a pwm reference table similar to current boost reference table logic, RPM and KPA for axis, and duty for values.
---
Existing logic is probably OK to switch configs when N2O is on or off, to handle ignition change (and fuel?)
Or alternatively if this is hand-in-hand by nitrous volume (rated by pwm duty) a simple config value is enough information to add extra fuel(?)
---
AFAIK this is not common in other (big brand) ECUs, so it might be a good idea to take advantage and give support for such an advanced (and cheap) control possibility.
---
Sizing
Based on existing measurements I can achieve 0.8-0.9G acceleration with warm tires but excessive wheelspin, maybe it would be slightly more with a 5-10% of slip.
Here's a power chart of a first-gear run with launch&wheelspin (black) and with simple acceleration (red):
(Time differences between the curves are scaled)
Based on the blue area, I'll need a maximum of ~70Hp "shot" of N2O.
For a test-drive open loop boost control with ref table (RPM, kPa) is usable I guess, usage frequency of the solenoids ("Pulsoids") seems 8-50Hz.
---
Write your thoughts here!