I'm looking for an ECU that will allow me to turbocharge a Rover A series MPi engine.
Is that the siamese intake ?
requires
- injection firing order of 1,1,2,2,1,1
- this is simple
- "mappable" injector timing (separately for each channel, right ?) to allow the fuel to enter in the very small injection window these engines have.
The VEMS hardware could do this, but the current firmware does not. Since demand is small, it is unlikely to be supported in near future
Carried on regardless!
Running a home made TBi setup. 2 injectors, staged.
Running 0.8 bar from a GT1752 on a 10.5:1CR
Using MPi trigger in flywheel.
Adding cam sensor soon, V3 has second VR input.
Looking to get a bootloader update now so I can make full use of my knock sensor and the new faster AE system :)