Hey fellow Vems fan.\n
I am currently working with an R25DET engine that has the multitooth trigger system. The triggers on the wheel have 2 circles. outer circle has 360 holes and the inner one has 6 holes, one for each cyl.
The optical triggers detect 120 degrees and 1 degree.\n
I dont have any clue about multitooth triggering so any help would be appreciated !
Q:
- Can Vems be used with orginal nissan multitooth trigger wheel?
- at least Fredrik Jagenheim (humming on ChatViaIrc, see MembersPage and look for Nissan with the search on HomePage) was experimenting with it, not sure about current status
- How different is MS files from Vems with MegaTune?
- the basic settings are very similar. However, files are not binary compatible.
How to change map sensor:\n
I have a 4.2 kPa map sensor and MT started up with an error like this:
http://i40.photobucket.com/albums/e221/joika/errror01-1.jpg\nÿ4ÿ\nÿ5ÿ
Locate and open Megatune2.25/mtCfg/vemsv3.ini \n
[MegaTune] MTversion = 2.25 ; MegaTune itself; needs to match exec version. versionInfo = "S" ; Put this in the title bar. queryCommand = "Q" ; MSnS returns 30 #if 12X12 #if HIGHBOOST signature = "VEMS v1.0 12x12 kpa=2,2" <-- '''Change 2.2 to what ever you have.'''\n
Save'n exit.\n
Choose VEMS Genboard V3 12x12 High-Boost.\n
The settings in MT still shows red on the settings but atleast I get correct readings from my 4.2kpa map sensor.