I'd like Marcell to compile a 1.0.69 firmware with this my_make!
Right now the only change is the 2x20 LCD.
Thanks!
P.S. Does MegaTune work with larger tables than 12x12, e.g. 15x15?
- \n
# MY_CONF += -D IGN_DUAL_OUT # board type: # MY_CONF += -D GENBOARD MY_CONF += -D GENBOARDv3 # MY_CONF += -D AFRESHBOARD # When you have MC33151 or MC34151 chips on v3 (now standard), you need FETDRIVER_INVERTING: MY_CONF += -D FETDRIVER_INVERTING # MY_CONF += -D FETDRIVER_NONINVERTING # LCD display # to enable MY_CONF += -D LCD # specify size #MY_CONF += -D LCD_2x16 MY_CONF += -D LCD_2x20 #MY_CONF += -D LCD_4x16 #MY_CONF += -D LCD_4x20 # specify lcd offsets, most seem to use the default # MY_CONF += -D LCD_OFFS0=255 # MY_CONF += -D LCD_OFFS1=255 # MY_CONF += -D LCD_OFFS2=255 # MY_CONF += -D LCD_OFFS3=255 # specify character set #MY_CONF += -D JAPANESE_LCD # 4x3 Keyboard (almost useless) #MY_CONF += -D KEYBOARD # Software PWM idle valve (was: IDLE_PWM_SOFT) # control moved to config.iac_conf # PS2 keyboard (very useful) MY_CONF += -D PS2KEYBOARD # Generate debug statistics MY_CONF += -D BENCHMARK # Display temperatures in Celcius MY_CONF += -D CELSIUS # Display high precision 16bit VE table after mct command MY_CONF += -D VE_TABLE_FIX # Disable all ignition related code, currently not supported: #MY_CONF += -D NOIGN # makes v2.x MISC output high after powerup (needed for bootloader) #MY_CONF += -D IGN_OUT_INVERTED # WBO2 related config: (you need a license to enable it, see Copyright in wbo2.c) # WBO2 support on v2 (with helper circuit) will be gone soon MY_CONF += -D WBO2 # MY_CONF += -D HEATER_INVERTED # MY_CONF += -D HEATER_PORT=PORTB # MY_CONF += -D HEATER=6 # Enable 12x12 table (15x15 or 16x14 would possibly work too) MY_CONF += -D VE_SIZE_RPM=12 MY_CONF += -D VE_SIZE_KPA=12 # Other things ... #MY_CONF += -D BUTTON MY_CONF += -D COMM_AUTO_DUMP #MY_CONF += -D VAL_T_16BIT # for v3 with lotsof free outputs, this is nice. # set parameters in config (possible to disable in config as well!): # MY_CONF += -D WOT_OUTPUT_TPS_THRESHOLD # Programmable miscellaneous outputs (like the WOT above, but RPM, TPS and MAP can be used in conjunction) # Possible usages: shift light, electronic boost control, N2O output, dummy secondary inj. enabling, etc. MY_CONF += -D MISC1OUT MY_CONF += -D MISC2OUT # there are other things, which are only interesting for developers # or serious (nonstandard) hacks: you can override almost anything. Eg LCD_MAPPING # can select an AVR => LCD portmapping which is not standard for the given board type, # and even the port used for DATA and the pin used for ENABLE can be chosen individually # config.kpafac resolution. 2 is default, 4 (kPa) is possible. Only effects kpafac variable # moved to config.kpa_conf[7:4], but can still be overridden here # MY_CONF += -D KPAFAC_UNIT=2 # moved to config.kpa_conf[3:0], but can still be overridden here # MY_CONF += -D KPA_CONFIG_RESOLUTION=1 MY_CONF += -D AUDITRIGGER MY_CONF += -D BOOSTCONTROL_LINES=1 MY_CONF += -D ALS # MY_CONF += -D SOFTWARNING MY_CONF += -D SOFTRPM MY_CONF += -D SOFTIDLE MY_CONF += -D SOFTREDLINE MY_CONF += -D SOFTLAUNCH MY_CONF += -D ALLOW_SLOPPY_TOOTHWHEEL MY_CONF += -D ONLY_LAST_TOOTHTIME # MY_CONF += -D LOWMAP_FUELCUT_HYSTERESIS=2
- \n
kim.achren@netikka.fi