SUBARU WRX turbo RA
- 4 cyl, 2.0 boxer engine
- Vems V3.3
- wastedsapark coil
- firing order: 1-3-2-4
- ball bearing turbocharger
- 4-1 crank trigger VR, no secondary trigger
- 4 bar MAP sensor
The car working with 1.0.73 firmware now.
Here are the config files:
http://www.vems.hu/files/Fero/subaru/config.txt
http://www.vems.hu/files/Fero/subaru/tables.txt
Plan to use the new firmware on the car.
Smooth random-injection-cutting based idle (can be configured since 1.1.35 with overrun_fuelcut - overrun_fuelresume = 1000 RPM)
Looking at MembersPage/GolfGtiLpg for trigger related settings to upgrade from working 1.0.7x to [1.1.35 for ferotesting]
- toothwidth...
- h[1]=00 02 00 02 00 00 00 00
- you might need to swap the 00 / 02 or rather the h[2] output
Differences during upgrade:\nÿ1ÿ
Look at global.h for new definitions.
- boost decrease above certain MAT, EGT, ...
- overrun_fuelcut - overrun_fuelresume must be EXACTLY 1000 RPM for the smooth fuel-random-cut to be enabled, eg.
- overrun_fuelcut 3000 RPM
- overrun_fuelresume 2000 RPM
- I forgot to set this in config, please apply !
vemsv3.ini changes need offsets from varstr.h