Peugeot 206 GTI 2.2L 16v
ew12j4 Engine
New cams, cam wheels, lighter flywheel, ew10j4rs inlet manifold, 4-1 exhaust manifold.
Vems 3.3 Pnp
Original 60-2 trigger wheel an VR sensor setup
original wasted spark ignition system
630cc injectors
EGT sensor
By the moment i struggle with getting spark. Just had the engine out for a full overhaul.(Started with the VEMS ECU before i took out the engine) The coils will not give any spark with the VEMS ECU. When i use the OEM ecu on the same loom i get spark. So no problem with wiring loom or sensors. Either i have messed up the config file or there is a problem with the ECU hardware.