Ignition parameters for odd fire coil type configuration.
I do not know on which crank tooth Firmware 1.1.90 start counting.
As I understand, the Marelli microplex logic for starting the ignition is:
| On CamTooth 1 | START COUNT Crank teeth |
| On CamTooth 2 | If CrankCount=2 then START IGNITION, (next cyl. is c2 90° from here |
Question
Lets note the 6 tuples of 2 crank teeth which are seen by the VR sensor during a double revolution of 720 ° by the following:
/t01/.30°./t02/ .. 90°.. /t03/.30°./t04/ .. 90°.. /t05/.30°./t06/ 90°
/t11/.30°./t12/ .. 90°.. /t13/30°/t14/ .. 90°.. /t15/.30°./t16/ 90°
Indeed cylinder numbering is not useful at this bench test stage. Although things are more involved we just want to exercise the VemsTune capabilities as a first attempt and observe with a scope what's coming out.
So lets us ask Genboard to fire 10° before the following teeth
/t01/ ..... 150° .... /t04/ .. 90°.. /t05/ ..... 150° ....
/t12/ .. 90°.. /t13/ ..... 150° .... /t16/ .. 90°..
What are the options to set from the MegaTune ignition menu? I have searched a while, but I must say it is not that simple. Help from Genbooard experts appreciated ;)!!