Engine
Inline 4 cylinder natually aspirated engine.
Intake
Stock setup is four 39mm flatslide carburetters.
Planned setup is 38mm throttles from a Suzuki GSX-R 600, including the stock injectors.
Note: This is from a GSX-R 1000, but the 600 version is very similar.
Ignition
Planning to use Suzuki GSX-R coil on plug.
Currently the stock setup is CDI with two coils.
Trigger wheel:
Recent photo of the engine. Two wires run to the pickup coil. That would make it an VR type?
Sensors
- TPS
- MAP
- Crank trigger. Almost certain that stock can be used. Most likely VR. (HALL or even optical can be used as well, just find out which type it is: count wires, measure Ohm with DVM, etc..).
- CLT
- IAT
- WBO2