Trigger related page for MembersPage/EricN
Started over with input trigger ideas. Took a VR sensor and 24 tooth trigger wheel out of a Honda Civic distributer. Ground off 1 tooth, pressed it on to a gutted Unimog distributer (took the whole advance mechanism out). Welded a plate inside, mounted the VR sensor on the plate. Now I have a 24-1 trigger wheel driven by the cam.
My plan is to run as a 12 cyl (engine is a 6) pretending to fire wasted spark so I can use the COP coils. I thought I read somewhere about setting the number of cycles that will trigger a reset (not sure if I worded it right but meant that engine sees the missing tooth 2 times then it starts over) Not too sure if setting that to 1 cycle would work somehow, need to try and find it again.