Is there any way to change the rev limit on-the-fly? In other words, I would like to lessen the rev limit when a certain condition occurs while the engine is running. I saw some references to a soft rev limiter, but it seems like that pertains to the ALS system.
- I guess ALS could be used with 0 degree retard (any objections?). In this case for revlimit adjustment if you like. See MembersPage/GaborRacz/NewAlsLaunchAndOthers
- forcing (close to) 0V on the TPS activates idle condition: overrun_fuelcut RPM is active (has been used for launchcontrol earlier). Take care not to short the 5V supply
- best to use EC36pin29: current limited to 5V/270 Ohm
- although EC36pin28 could survive too (appr 100mA current limit), but that could cut power to the HALL sensor or external 5V MAP sensor.