Discussion About TCS inputs
- there are 8 free 12-bit AD inputs. However they must be connected to connectors, only very few are buy default - I check your ECM before clamping. I can do these checks as and when I need them. (Won't be for a while - I need to get the standard stuff working)
- TCS needs analog input (not freq) ?
- I didn't expect there to be 4 spare inputs for new frequency inputs... So the wheelspeed is freq-signal (with ... pulses/rotation * wheel circumference = ... pulses / km, but) you want to use monostable multivibrator and lowpass filter circuit to convert freq to analog signal ?
- I don't want to, but it appears that is what is fitted on the car at the moment. I would prefer to just use something like 4 ABS sensors and tone wheels and be done. That is if I can fit it all into the ECU inputs.
- "Actuators" for TCS - fuel cut, ignition retard, ignition cut etc.
- these actuators are already implemented (these were needed for ALS, see MembersPage/GaborRacz/NewAlsLaunchAndOthers)
- Good enough for me...