Testing the Sensors
I've bench tested the NTC sensors and they work in pots of water at varying temperatures.
I need to add a IAT sensor to the manifold somewhere. If the weather's good at the weekend, I'll get this done. There's a convenient threaded hole in the plenum, so I thought I'd look for a nice "bolt in" IAT sensor. So far, nothing has been found that will work. Might have to re-think this and make up an IAT from the webshop NTC parts & a junior timer connector.
The wiring is all in now, except for the wideband lambda sensors. I need to do some work on the exhaust before these will work.
- Does anyone in the UK know where to get weld-in lambda bosses from?
I have recompiled the firmware for the non-GM CLT sensor. Not tested the calibration properly yet.
TPS just worked, which was nice. I can cope with this happening...