- MembersPage/Daniel/ToyotaGTI * MembersPage/Daniel/Starlet * MembersPage/Daniel/Impreza * MembersPage/Daniel/EP70
Hi my name is Daniel and running a tuner company In Denmark
Have installed many cars with Ms and would like to try Vems
More to come
At the moment I am trying to install Vems V 3.5 on a Honda CRX Del sol whit a B16a2 engine from 93.
I have 2 questions:
Can the vems make the next cylinder trig like the ms? Its because the engine have the trigger in TDC of every cylinder.
Should i write 0 degress or 180 degress in megatune?
I will use the oem igniter in the car, how can i control it?
When I give it ground on the trigger wire it fires the coil, but it dosnt work when i connect it whit vems. I have also tryed to give it a 1K pull up to 12v. But no spark.
Regards Daniel
I am now trying to trig on a toyota 24 tooth CAM-wheel for primary trigger and a 1 tooth camwheel for 2´nd trigger. See InputTrigger/MultiToothNoneMissing
I really dont understand where i can type thoes numbers, HELP!:
tooth_wheel_twidth1=78, tooth_wheel_twidth2=00 (0x78=120 that is 30 deg
Regards Daniel
- As I know that you are installing a bunch of ecu´s on jap cars and would like to use the oem trigger 24+1
- Maybe this could help you but have in mind that we sometimes have trouble reading the low voltaic trigger signals that many jap cars are using.
- Also maybe you have to scoop the trigger signals so others have a chance to help you.
- This will maybe require some electronic adjustments on the vems board.
Tnx Peter
http://www.vems.hu/wiki/index.php?page=VehicleFitment%2FNissan
http://www.vems.hu/wiki/index.php?page=VehicleFitment%2FToyota%2FTriggers
http://www.vems.hu/wiki/index.php?page=InputTrigger%2FMultiToothNoneMissing
http://www.vems.hu/wiki/index.php?page=MembersPage%2FFero%2FNissanSX
http://www.vems.hu/wiki/index.php?page=VehicleFitment%2FTwentyFourPlusOneTrigger