Hello, i am installing vems on a supercharged toyota ae92gti!
I am using the OEM VR Sensors.
- The car is now running. They installed firm. 1.1.96 and typed 24 in menu sectrigger “Maximum primary edge between secondary edges”. Nice function
/Peter
There are 3 sensors in the " dizzy"
One there are counting the 24 tooth in the bottom. ( primary trigger)
Two sensors triggering at the wird 1 tooth wheel. There are placed 180degrees. I am useing the one sensor so it triggers one tooth in 720 crank degress.
I have some troubles about the sec trigger, i got the Sec trig pos bad offen..
I have tryed everything ( allmost ) Triggering on diffrent edges and so on. Can any one look at my settings, and trigger logs ?
http://www.vems.hu/files/Racezone/Supercharged/Starting.vemscfg
http://www.vems.hu/files/Racezone/Supercharged/v3.3_u004134-2012-03-22-21.31.15.triggerlog
http://www.vems.hu/files/Racezone/Supercharged/v3.3_u004134-2012.03.24-21.52.58.vemslog
I have briged R182, 5V modeselect, 1k ohm pull down, but it isnt real good..
Any surgestions ?
Trigger is of cause 24 + 1
Thanks Daniel