About this page
This page covers the installation of a GenBoard/VerThree into a Daihatsu Charade GTti wich is a 3cyl 12valve Turbo car.
http://en.wikipedia.org/wiki/Daihatsu_Charade
Config files, log files and triggerlog is found in the file area: http://www.vems.hu/files/MembersPage/Daihard/
MembersPage/Daihard/Assembling
Ignition system
The initial start will use the original single coil and distributor.
Potential upgrade to coil on plug. Plug length from top of cover in CB80 GTti is 117mm . Bid on 6-BMW COP units on eBay 21-09-2004
Possible COP fitment (Beru) :
| beru nr | beru ref nr | connection | length in mm | ohms |
| ZLE 232 | (BMW) 0.300.122.102 | M4 | 117 | 2000 |
| ZLE 233 | (Audi/VW) 0.300.122.103 | M4 | 122 | 5000 |
| ZLE 234 | (Mercedes) 0.300.122.111 | M4 | 113 | 2000 |
Fuel system
Fuel injectors : 3 pcs.DENSO 23250-87701-000 295cc/min
Injector fuel pressure rating : 2,5bar (Manual)
Fuel pump 80 litres/hour : 1330 cc/min
Injector solenoid electrical resistance : 13.8 ohms