Daihard Partslist page added 12-09-2004.
update: 21-09-2004
Parts orderd at the webshop:
1 x WideBandO2 sensor (LSU4) = 69.00EUR
1 x Wideband connector () = 19.00EUR
1 x TPIC8101DW () = 6.00EUR [egt controller]
3 x TLE4905L (HALL) () = 9.00EUR [2 spares]
1 x Stepper kit (SN754410) = 3.00EUR [for future setup]
2 x NTC 2k2 () = 2.00EUR [plenum temp and pre IC temp]
1 x MPX4250AP (MPX4250AP) = 23.00EUR [MAP sensor]
1 x LCD4x20 (LCD4x20) = 28.00EUR
5 x Ignition IGBT () = 20.00EUR [3 on plug ignition coils 2spare]
1 x GenBoard v3.x (v3.1) = 189.00
Ship start 7 weeks
6 x FET: FQPF20N06L (FQPF20N06L) 12,00[O2,injectors,fuelpump]
2 x AD597AR (AD597AR) = 12.00EUR [knock sensor]
Parts needed to fit the Genboard ver3.
The board from Webshop
Sensors:
1xHall sensor for cranck trigger
3x evenly spaced magnets for HAll http://www.conrad.nl
EGT sensor with short probe stick to fit the short 12cm extractortube webshop EGT is to long.
WBO2 from webshop + WBO2 connector
Knock sensor
electronic parts:
from webshop:
3x IGBT for driving the coils on plugs.
4x FET 3 for driving Injectors 1 for boost soilenoid.
Map sensor
LCD 4x20
TPIC8101DW Dual-channel acoustic knock sensor interface chip
AD597AR precisional K-Thermocouple EGT amplifier
DS2480B
else:
from scrapyard or elsewhere
3x coils on plugs (audi?)
bigger injectors? if LowZ need the PWming kit from the shop!!
idle solenoid
fast idle solenoid or steppermotor to combine these two.