Part of MembersPage/DTechnologies/Hayabusa project.
Configuration (it's not complete because I'm writing it RIGHT NOW :)
While I'm waiting to get some quotes back on having my rotor machined, I'm going to start building my config files and tables using what information I have right now. I've been reading some of your configurations and I just hope that together we can keep my engine from blowing up hehehe.
Much of this is based off of the comments in JimW's fantastic setup config. I'm going to make a lot of mistakes I'm sure and I'll make comments where I've left items as is because I didn't know if they needed to be changed and where I've put in my own values. I'll be using JimW's values where I don't know what my values should be...let me know if you object Jim. I'll then change these values over time to values that will work with my engine.
Q: Is the period time in 'crank_minper' the minimum period between teeth or between a missing tooth trigger event?
Q: How does 'overrun_fuel_cut' and 'overrun_fuel_resume' work?
Code will go here.