Audi AAN 5cyl 20VT engine
Please measure the MAF pins in the harness
- which AANpin it belongs to (fill in table below)
- any pin connected to ground must be avoided.
- Is there a +12V pin (capable of 2..3A) for heater+ ?
Can you fill this in ?
Pins to use for WB02 Meter:
- 1, AANpin...#42 (open on stock harness)
- 2, AANpin...#37 (+12V supply)
- 3, AANpin...#43 (open on stock harness)
- 4, AANpin...#51 (open on stock harness)
- 5, AANpin...#54 (open on stock harness)
- 6, not used
Using these pins we wouldn't use the MAF plug, but would allow there to be enough inputs for the WB02.
In the meantime, review VemsAudiAan
You can do the verification measurements,