A special subpage with primairy trigger information.
Sensor info:
- VR type
- partnumber GM 90451441
- Pin1 color brown/black
- Pin2 color brown/red
- Pin3 color black (cable shield)
- Sensor resistance = 517 Ohm
When I connect DVM to VR sensor. Red DVM wire to VR sensor pin 1 and black DVM wire to VR sensor pin 2. I get positive voltage when metal object is moving towards sensor. And negative voltage when metal object is moving away from sensor.
Right now VR sensor Pin1 is connected to EC36pin26. And VR sensor Pin2 is connected to EC36pin27. But if I understand correctly this is wrong. Am I right?
Wheel info:
- 60-2 type
- partnumber GM 90 265 094
- pictures:
