BMW M106 engine...
Primtrig=VR seems likely, but please measure.
Will the engine have distributer ? If direct ignition, than sectrig HALL.
- MembersPage/GergelyLezsak/BigSixTurbo
- suggests VR, VR for factory 60-2 VR and
Trigger setup
Measure for each (trigger) sensor: if you find 2 pins that measure same resistance in both directions (typically between 300..1400 Ohm), that is VR sensor. Otherwise HALL (or optical, but HALL input needed for that too, "eg.: very high frequency low capacitance value sectrig HALL is used for nissan-trigger).
- "to measure is to know" (works even if there are several similarly named models out there).
- Please write your measurement results here.