Related to BMW M52 MembersPage/BmwMFiftyTwo
Measure HALL trigger supply voltage
Related to:
- mot88/54
- mot88/65
- Serialnr
- Vemslog captured with VemsTune during the cranking attempt could reveal something (eg. it would be awesome if only some configuration adjustment would be needed).
However, for trigger problems more measurements are almost always needed also:
- Measuring triggers, DC and AC voltage
- OscilloScope the trigger signal might be necessary
- InputTrigger/TriggerLog
- this might reveal that signal is missing from only primary or only secondary HALL sensor (or both).
Preferrably create custom page for the project (but editing this page to provide information is temporarily OK, possible to organize later, just define some project nickname ).