MembersPage/BmwMFiftyTwoOutputs (2020-05-14 06:00:00)

Subpage of MembersPage/BmwMFiftyTwo

Please disconnect outputs initially (every output you can), and enable after

We received a report that some outputs activated by p259 does not actually activate (including BMW52/73 DME relay and BMW52/69 fuel pump).


another BMW M52 harness (for the bench)

We received an M52 harness (and some sensors including the frequency output cam-HALL sensor), and did more tests this week.


Cylinder # to EC36 Pin numbers for Inj and Ign outputs? See the default uploaded config (even if acidentally changed, find on the local notebook drive, under VemsTune VEMS_files ... bkup dir).

Also see [M50-vanos-vs-s50b32-vs-M60B40_B30.xls spreadsheet]

Below is based on M52-to-EC.xls

Cyl 1 - Inj A EC36/7 (MOT88/6) - Ign0 EC36/35 (MOT88/29)

Cyl 2 - Inj B EC36/19(MOT88/5) - Ign7 EC36/10 (MOT88/1)

Cyl 3 - Inj C EC36/8 (MOT88/22) - Ign2 EC36/34 (MOT88/30)

Cyl 4 - Inj D EC36/20(MOT88/24) - Ign3 EC36/36 (MOT88/2)

Cyl 5 - Inj E EC36/9 (MOT88/33) - Ign6 EC36/24 (MOT88/31)

Cyl 6 - Inj F EC36/18(MOT88/23) - Ign1 EC36/33 (MOT88/3)