MembersPage/BmwMFiftyTwoOutputs (2020-05-13 16:52:13)

Subpage of MembersPage/BmwMFiftyTwo

Please disconnect outputs initially (every output you can), and enable after

We received a report that some outputs activated by p259 does not actually activate (including BMW52/73 DME relay and BMW52/69 fuel pump).


another BMW M52 harness (for the bench)

We received an M52 harness (and some sensors including the frequency output cam-HALL sensor), and did more tests this week.


Cylinder # to EC36 Pin numbers for Inj and Ign outputs? See the default uploaded config (even if acidentally changed, find on the local notebook drive, under VemsTune VEMS_files ... bkup dir).

Also see [M50-vanos-vs-s50b32-vs-M60B40_B30.xls spreadsheet]

Below is based on M52-to-EC.xls

Cyl 1 - Inj A EC36/7 - Ign0 EC36/35

Cyl 2 - Inj B EC36/19 - Ign7 EC36/10

Cyl 3 - Inj C EC36/8 - Ign2 EC36/34

Cyl 4 - Inj D EC36/20 - Ign3 EC36/36

Cyl 5 - Inj E EC36/9 - Ign6 EC36/24

Cyl 6 - Inj F EC36/18 - Ign1 EC36/33