BMW M52 engine. (HALL-HALL)
Black mot88 connector lock is slightly different from the natural color M50 (either type can be used with a bit of filing).
The mot88 pinout of M52 is VERY different. So only plug in ECU explicitely made for M52. Do NOT plug in ECU made for any other type (M50 or S50 or other).
See [M50-vanos-vs-s50b32.xls] columns.
Easy to apply, but NOT Plug and play
- MembersPage/BmwMFiftyTwoTriggers - HALL-HALL trigger (and trigger supply) related (cam-HALL sensor SWAP REQUIRED)
- follow same install procedure as with standard (Econoseal) v3 (with harness made by someone else) : disconnect ignition coils, injectors and other outputs initially
- before connecting output loads, verify output configuration in VemsTune, eg. the expected output is activated in order (eg. cyl, 153624)
- failing to do so might result in unspecified behavior, damage, and loss of warranty
- eg. misc output configured to inj might flood cylinder and cause hydrolock; ignition transformer ON (for more than the desired dwell time) might burn fuse or trace or IGBT output.
Fuel consumption output
1998_BMW_318is-c_323i-c_328i-c_M3-c_ElectricalTroubleshootingManual_M52.pdf
- page #89 BMW88/pin9 is listed as: "TI-measurement signal (fuel consumption) Instrument cluster" and falsely listed as "E" (ecu input)
- page#101 clearly shows BMW88/pin9 being ecu output.
- p259 200mA would be enough for it, only has weak pullup.
Old (related) URL-s
MembersPage/BmwMFiftyTwoMainRelay Prelling - solved by adding diode: anode=ec36/25 ->|- mot88/65