Open Issues ToDo
Is it possible to move Ignition out 0 to one of the P259 pins and if so, how would I go about doing that?
Looks like bins change but Megatune displayed is fixed and must be edited to reflect the new bins.....I guess I am one of the crazy ones that wants to alter the Warmup Coolant Bins. I beleive these have moved to flash as they do not seem to respond to Config File Changes. Can someone confirm this and point me towards a souce file to edit these values?
An example of how CWL, CWH, AWEV, AWEV_Temp..., and AWC affect cranking and afterstart can be found at MembersPage/BillHart/CrankingAfterStart.
Open Questions:
- Is it possible to move the injector firing point within the 720 degree cycle for a primary/no secondary trigger system?
- no. Actually, 720 degree cycle does not exist (as far as the ECM is concerned - the valves know about the 720 degrees cycle of course) without camsync. Only a 360 degree cycle exists. It would be possible by analizing the MAP signal or the RPM angular speed variations, but it's not implemented. Thank You Marcell, Bill Hart
Recent Questions:
MembersPage/BillHart/ProblemHistory for older issues that have been resolved.
Projects Underway
MembersPage/BillHart/WinMobileLogger Win Mobile platform to Fat32 memory card logger. Looking for SIPR examples, if any, to ease the adding V3.3 query to Win Mobile code.
- [VR_Emulator] is a parallel port based Op-amp circuit that provides a plus or minus pulse about zero to emulate a VR sensor. You build the Basic routine to generate the crank (and cam)input wave form you need. Drop me a note if you need my QB code as a starter.
- we usually use stereo soundcard nowadays. It has many advantages, like processor overhead is small, amplitude can be varied, code is not hard to port between platforms, and it can even work without any executable (wav-s can be played with standard tools).
MembersPage/BillHart/LoggingDongle anyone interested in a small relatively inexpensive logging dongle?