ISO/DIN G-code for lasercutting throttle position sensor (TPS) adapter plate.
- suitable;
- for mounting standard potentiometer type TPS sensor (30.5 - O - 24 mm between mounting holes) in place of older (35 - O - 35 mm) idle and WOT switch device.
- may suit to other 'TP switch' to potentiometer conversions also.
- has 63.5 degree inclination angle compared to original.
- throttle shaft extension where potentiometer type sensor is mounted needs to be shorten (cutting length/amount depends of TPS adapter plate thickness) accordingly.
(THR_ADAP.DIN)
N1G29X80.00Y59.01I0J0
N2G0X0Y0
N3X26.15Y5.00
N4G1Y3.40M04
N5G41
N6G3I26.15J5.00M05
N7G40
N8G0X5.00Y32.18
N9G1Y30.15M04
N10G41
N11G3I5.00J32.18M05
N12G40
N13G0X51.12Y54.01
N14G1Y52.41M04
N15G41
N16G3I51.12J54.01M05
N17G40
N18G0X75.00Y32.18
N19G1Y30.15M04
N20G41
N21G3I75.00J32.18M05
N22G40
N23G0X40.00Y32.18
N24G1Y24.63M04
N25G41
N26G3I40.00M05
N27G0X41.71Y4.93
N28G1X38.19Y11.70M04
N29X33.72Y9.21
N30G3X31.15Y4.92I36.15J4.84
N31G2X21.52Y6.88I26.15J5.00
N32G3X20.83Y11.83I16.89J8.76
N33G1X10.32Y25.34
N34G3X5.69Y27.22I6.37J22.27
N35G2X7.84Y36.29I5.00J32.18
N36G3X12.83Y35.88I10.69J40.40
N37G1X43.29Y50.30
N38G3X46.14Y54.41I41.16J54.82
N39G2X56.01Y52.93I51.12J54.01
N40G3X57.51Y48.16I60.89J51.85
N41G1X68.61Y38.02
N42G3X73.49Y36.94I71.98J41.71
N43G2X72.43Y27.89I75.00J32.18
N44G3X67.43Y27.97I69.86J23.60
N45G1X38.22Y11.71M05
N46G40
N47G99
&