1993 Audi USA B4 90 quattro with 4.2 ABZ V8.
ECU V3.6
FW 1.2.20
VT 1.5.46
60-2 TTV flywheel
Audi OEM cam sensor
OEM injectors (220cc)
OEM sensors
http://www.vems.hu/files/smurfinator/2017-new-CPS-config-full-2.zip
http://www.vems.hu/files/smurfinator/v3.3_u009651-ether%20start.vemslog
http://www.vems.hu/files/smurfinator/v3.3_u009651-running%20with%20blips.vemslog
http://www.vems.hu/files/smurfinator/v3.3_u009651-2017-01-15-06.53.39.triggerlog
Running POORLY full sequential COP
Hard to start normally but starts quickly with ether spray
I had trouble converting from my 8 year old firmware that ran very well using wasted spark. I somehow kept losing track of the correct required_fuel constant...It would seem to change itself, but was my stupidity in not labeling my config files correctly. ANYWAY, my fuel maps are no longer any good and spark maps is ???? due to many trigger hardware changes and various crazyness with trying to make the car drive temporarily for moving houses and bad money/job changes.
I would love to see a good ABZ config file to figure this out myself, but until somebody responds with that, I hope to get some help. I have to move 1500 miles at end of the month and car is not drivable due to my poor VEMS tuning.
Fill in these pages with all the required info and watch your config be pretty much built for you
MembersPage/BenNesbitt/IgnitionPage
MembersPage/BenNesbitt/WBsensor
MembersPage/BenNesbitt/FuelPage
MembersPage/BenNesbitt/InputTrigger
MembersPage/BenNesbitt/IdleControl