<p>Build is a vw 2.0 16v gt35r
Engine build is done minus the vems</p>
<p>wire harness plugs are here so i made the harness. ecu should be here next week.
harness is going into the car later today</p>
<p>Harness Specs:
12v IGN: 12AWG to EC36 pin 25
GND: 12 AWG to EC-36 pins 5,21,22,32,26 sensor GND wire
Ignition: EC36 pin 34, 36 (coils 2 & 3)
TPS: EC36 pins 1,29, grnd
IAT EC36 pin 2
Injectors EC36 pin 7,19,8, 20
VR: EC36 pin 27
Ch5 Output Pin 15 - fuel pump relay
Ch1 Output Pin 31 - Fan Relay
Ch4 Output Pin 3 - Shift Light
Ch0 Output Pin 4 – Tach out
Analog 7 EC18 pin 12 with input from EC36 pin 29 launch control</p>