memberspage/bdcoombs/test
ECU SPECS
Board_version=v3.3
Serial_nr= 2692
pump-= 4.0V
wbo2_pump_pw_zero=0x64
wbo2_nernstdc_target=0x86
pump+= -2.7mV/200 Ohm
AREF=4.9V
(C103=1nF, no D100)
Engine Specs:
- VW 2.0 16v ported headed. Built Bottom End
- GT35R
- EP racing manfiolds
- VEMS 3.3
- 400kpa built in Map
engine build is done
Harness is in the car
ECU POWERS ON
Harness Specs:
- 12v IGN: 12AWG to EC36 pin 25
- GND: 12 AWG to EC-36 pins 5,21,22,32,26 sensor GND wire
- Ignition: EC36 pin 34, 36 (coils 2 & 3)
- TPS: EC36 pins 1,29, grnd
- IAT EC36 pin 2
- Injectors EC36 pin 7,19,8, 20
- VR: EC36 pin 27
- Ch5 Output Pin 15 - fuel pump relay
- Ch1 Output Pin 31 - Fan Relay
- Ch4 Output Pin 3 - Shift Light
- Ch0 Output Pin 4 – Tach out
- Analog 7 EC18 pin 12 with input from EC36 pin 29 launch control