MembersPage/BasilDaham/BOM
(2006-11-07 00:58:50)
- Assembled v3.3 controller
- NO 1-wire interface
- 6+2 ignition config
- knock and 1 EGT
- LCD & PS2
- 300kpa onboard 5/3mm
- with screws mounting style
- with powerflyback
- primary trigger HALL
- secondary trigger HALL
- LCD4x20 (BLUE)
- I'm assuming this is all the kit I need to make a loom:
- Econoseal / JPT Crimptool
- Econoseal18-Wire
- EconoSeal36-Wire
- two wideband connectors (i'll crimp my own wires with the above tool as long as the recepticles are included in the wideband connector kit, otherwise please send the one with crimped wires)
- two 3-pin simple wire to wire connector (pair)
- four 2-pin simple wire to wire connector (pair)
- Anything else i'm missing?