BMW
BMW-s most often use the 60-2 primary trigger (HALL or VR depending on version), which is well supported even with multiple toothed sectrig and third trig (for cams)
- double-vanos is supported with up to 4 actuators (2 per cam).
- if 1 pin is grounded in the solenoid connector (usually those that have VR,VR,VR triggers, but verify with DVM just in case), request "Please add 4 PFET hi-side switch outputs in the vems v3.x ECU please" in the order comment (currently no extra charge).
- electronic throttle is also supported, but high current (14A capable) H-bridge motor-driver must be used (as the 1.2 Ohm DC-motor can draw >12A current)
[S14]
MembersPage/SamuelLindkvist - V3.2 on an BMW S14 race-engine.
MembersPage/BernardAhyow - Planning to use Genboard V.3 on a BMW S14 race engine with knock control
[M10]
MembersPage/MarteleurTim - Setting up v3.3 on BMW M10
MembersPage/MarteleurTim/page2 - Setting up v3.3 on BMW M10 part 2
MembersPage/RikardAhlin - Building a BMW M10 racecar engine.
MembersPage/PoweredBMW-M10turbo
[M20]
MembersPage/IrbensA - Planning to turbocharge BMW 325iX with M20B25
MemberPage/MilanaPerisic - BMW E30 M20B27 engine
MemberPage/MTuning/TaaviBMW - BMW E30 325ix M20B25 Turbo
MemberPage/Devinaz - stock BMW e30 m20b25
[M30]
MembersPage/SamSpade - 1985 BMW 728i, upgrading to M30B35 engine, with coil-on-plug
MembersPage/BabisBabou - BMW E28 528i '84 with a M30B28 engine
MembersPage/RicoZiemer - BMW e30 with M30B35
[M50]
MembersPage/Protaz - BMW 525 turbo 24v non-Vanos
MembersPage/ManuLeinonen - BMW M50B25T without vanos + Genboard v3.3.
MembersPage/FredrikHafslund - Trying to get v3.2 up and runing on a BMW m50b25, and supercharging the engine.
MembersPage/PowerPak - Planning BMW M50B25 turbo
MembersPage/ReinisAndersons - BMW E30 with M50B25
MembersPage/DevinPersons - BMW E30 with M50 turbo
[M54]
MembersPage/JosephBmw M54B30 turbo double Vanos
[M70]
MembersPage/PoweredM70-V12
[M102]
MembersPage/Istvn (TODO: pagename accent problem) - BMW 3.5 turbo M102 E30
[S50]
MembersPage/RijaRobinson - S50B32 Turbo Dual Vanos
MembersPage/TrifanCatalin - S50B32 Turbo Dual Vanos,
MembersPage/HankMoody - BMW E30 with S50B32, NA, no vanos
[S38]
MembersPage/JohannesUhlich - BMW E34 M5 S38B38 (Turbo)
[Unknowen Engine]
MembersPage/TorokHimer - BMW 325
MembersPage/BAhyow - help in development of V3.x. Specializing in 4 cyl BMW engines (m10 and s14).
MembersPage/GeorgePapas - Will install a Genboard V3 on his BMW E30 325i with turbo
MembersPage/GergelyLezsak - BMW E30 325i with turbo running on GenBoard v3.3
MembersPage/AndreasThulin - Will install a Genboard V3 on Bmw e36 328 Turbo
MembersPage/BengtR - Adapting v3.2 to turbocharged BMW 2.5 liter inline 6.
MembersPage/FredrikEriksson - BMW M535i e28 -87, Twinturbo
MembersPage/Powered-BMW-20IS
MembersPage/PappIstvan - BMW M5 4cyl
MembersPage/Polarbear? - BMW 535TIC
MembersPage/PoweredMotronic-BMW
MembersPage/RobG - 1989 BMW 325i Turbo, 2.5L, HX50
MembersPage/GDebreczeniAndEcsy Assembling VEMS and use on BMW M70
MembersPage/DanielDrahos - BMW 325i 1988 with VEMS 3.3 under development
MembersPage/BmwVenesz - 4 cyl BMW
MembersPage/Bvd BMW 635 csi.
MembersPage/AjRose - E30 Turbo
MembersPage/PoweredLakyBoy-bmwv8
MembersPage/KimAchren - BMW turbo
MembersPage/DickSafier - Gen 3.3 board powered BMW 87 325is.
MembersPage/kos - mostly 6 cylinder BMW engines
MembersPage/GunnarReynisson - BMW Tuning
MembersPage/JohnJensen - BMW
MembersPage/MischaM5 - bmw e34 M5
MembersPage/Gumetina - M3 E36 Turbo
MembersPage/BostonAndy - 1989 E30 325i Turbo Build
MembersPage/DomyM - BMW M5 3.6
MembersPage/AnderasAndersn - BMW 336 turbo, BMW 318i turbo -85. BMW 535 turbo.
MembersPage/JasonVoytilla - VEMS v3 on 1990 BMW 325i E30 with S52 Turbo
MembersPage/BMWe36M50 - Vemsed E36 M50 Turbo
MembersPage/SalyiBmw - ancient install, recent mods