| Honda (incl Acura) |
[D16]
MembersPage/JanneMantyla - Honda D16Z6 SOHC-VTEC, ITBs with AlphaN, VTEC drive.
[Unknowen Engine]
MembersPage/DaveBlundell - 91 CRX LS/Turbo, 95 Civic Ex Coupe, 87 CRX Si ZC soon to be turbocharged. Active in Honda DIY EFI, want to get involved here.
MembersPage/AnderasAndersén - Honda Prelude 92- turbo.
| Mazda |
[13B]
MembersPage/PelleWallberg - 1973 Mazda RX3 13bt Turbo
MembersPage/AmandaWynne - 82 RX7 13B Mild Port, currently carburreted, going dual TBI
[Unknowen Engine]
_Rotary-Wankel_
MembersPage/BrendanBlessing Turbo 3Rotor RX7
MembersPage/LuciuS?????? - Rx7 fan and owner
MembersPage/SirKan - Plans to use genboard v3.2 on my 1987 MAZDA RX-7 Turbo II
MembersPage/PoweredRX7 rotary
MembersPage/AlexanderGuy - Working on MegaTunix, and planning a Genboard install in an 87 Turbo RX-7.
MembersPage/Poweredmy RX7 Rotary (Wankel engine) mazda
_Other_
MembersPage/Fero - AVR powered Mazda 323F.
MembersPage/Kottan - PnP? install on Mazda 323 GT-R
| Mitsubishi |
[Unknowen Engine]
MembersPage/PoweredMitsubishiEvo8
MembersPage/EsaMankki - Planning on using Genboard V.3 as a replacement ECU for early nineties Mitsubishis.
MembersPage/HankyKarlsson - Planning on install Vems V3.3 on my evo, and help friens with installations
| Nissan (incl Infiniti & Datsun) |
[CA18]
MembersPage/MaxLarsson - Nissan 200sx with ca18det
MembersPage/JannoKusman - Doing research to install GenBoard v3.3 to Nissan 200sx CA18DET using InputTrigger/NissanTrigger
[KA24]
MembersPage/NiclasAB - Nissan 200sx with a Ka24de(t)
[RB25]
MembersPage/FredrikBruland - Datsun260z with RB25DET multitooth trigger system, Vems 3,3
[L28]
MembersPage/JeffreyRichard - A complete guide to implementing the MS-AVR on a Datsun L28ET engine.
[SR20]
MembersPage/Larsa - Nissan 200sx SR20DET
[Unknowen Engine]
MembersPage/FredrikJagenheim - Hoping to put it in a Nissan 180SX.
MembersPage/PeterKonyha-Planning a v 3.3 on a Nissan Cherry turbo
MembersPage/FXLegends - 2005 Nissan Sentra project
MembersPage/MattBushell - Nissan 200sx S13 - WB02 Install + Stuff
MembersPage/JensDahl - Working on Nissan 280 turbo
| Subaru |
[EJ22]
MembersPage/DavidCarr - Subaru EJ22
[Unknowen Engine]
MembersPage/MihkelOsa - Subaru Impreza GT MY99
MembersPage/PoweredSubaru.impreza
http://www.vems.hu/wiki/index.php?page=MembersPage%2FKamuto%2FSubaru%2FAAAA ez30 swap to old legacy
| Suzuki |
[Unknowen Engine]
MembersPage/Gabor - Installing a Genboard 3.0 on a Suzuki Swift
MembersPage/AttilaSzucs - Trying to get v3.2 up and runing on a Suzuki GTi 1.3 Turbo
MembersPage/SuzukiValveControl
| Toyota (incl LEXUS) |
[4AG]
MembersPage/GrantHendricks - AE86 with 4AG 20V on VEMS
MembersPage/Irishtwincam - Support the install of VEMS on Irish Toyota Corollas, mainly 4AGE engined drift & rally cars.
MembersPage/Michael Atkinson - Toyota Corolla AE86
MembersPage/Skassa -Installing vems on a Toyota age86 20 black head
MembersPage/Uzelac - pretty standard N/A 4AGE 16V
[3SG]
MembersPage/DanielHenriksson - Using Genboard 3.2 on Toyota 3SGTE engine, 1988 GT-Four/Alltrac
[7MG]
MembersPage/JensKierkemann - 3.3 on Toyota 7M-GTE
MembersPage/Gachax - 3.6 on Toyota Supra MK3 7M-GTE
[1JZ]
MembersPage/JamesDW - 1JZ Engine conversion.
MembersPage/NathanielAllen - Toyota MKIII Supra 1jz-gte
[2JZ]
MembersPage/Taz - 3.6 on Toyota Supra mk4 2jzgte
[Unknowen Engine]
MembersPage/MalcolmBagley - Toyota Land Cruiser 1975 2F 4.2L Petrol
MembersPage/AdamFoch - Going to be setting up an MSAVR on a Toyota Celica All Trac Turbo
MembersPage/JayMcKearn - Building GenBoard/VerThree controlled lexus v8 powered custom car.
MembersPage/CocorToyota - Celica , turbo ,water inj, nos , v3.3
MembersPage/ToyotaPriusLpg - Prius on LPG
MembersPage/ThomasSchragl - Celica GT-Four