Notes
Outputs
The FET and IGBT places on the board can be assigned with much freedom. See GenBoard/Manual/DigitalOut, GenBoard/Manual/DigitalOut/Table
- injectors => injector outputs
- ignition => ignition outputs (logiclevel for active coils; IGBT based power outputs for passive coils)
- bipolar stepper (if used) => stepper outputs
- other outputs => after assigning the above use the remaining outputs. take care about current rating and flyback protection (eg. WBO2 second channel FET and DPAK "extraFET"-s have no flyback installed by default!)
- Use the higher current stuff first for more safety
- except for (low current like) LEDs (like shiftlight), where p259 outputs are the best
- don't forget flyback and GND and GND5 connections