Useful tool was written in couple with Roman (VC++ GUI guy).
It implements slighly improved algorithm from firmware dropped VE learning, but for PC.
It has very user frendly interface.
- Color cells, bright red - high egt, dark red - knock (4000rpm 150kPa at my screen), green - 1% shoot, yellow - 3% shoot, blue - locked by user.
- Show load marker (4600rpm 180kPa at my screen)
- Show average deviation for each cell, therefore allow accuracy manual cell edit.
- Show linear gauge not only for AFR, but for target too.
- Use both EGO and AFR+Target, therefore 1.1.51 has changes in RT data for better precision lambda and target.
- Works very fast with user help, allow draw accuracy map from clear sheet for minutes without any logs.
- Show warnings with red color, gets treshold values for CLT, EGT, AFR, Knock from warning light config. DutyCycle warning at 90%.
- Save/restore full tuning session, table with deviations and color attributes.
But it is still pre alpha testing, many things are still absent, and works only for 1.1.51 with alternative knock solution and warning light defined for a while.
