Some small tool was written in couple with Roman (VC++ GUI guy).
It implements slighly improved algorithm from firmware dropped VE learning, but for PC.
It have very user frendly interface.
- Color cells, bright red - high egt, dark red - knock (4000rpm 150kPa at my screen), green - 1% shoot, yellow - 3% shoot, blue - locked by user.
- Show load marker (4600rpm 180kPa at my screen)
- Show average deviation for each cell, therefore allow accuracy manual cell edit.
- Show linear gauge not only for AFR, but for target too.
- Use both EGO and AFR+Target, therefore 1.1.51 has changes in RT data for better precision lambda and target.
- Works very fast with user help, allow draw accuracy map from clear sheet for minutes without any logs.
- Show warnings with red color, gets treshold values for CLT, EGT, AFR, Knock from warning light config. DutyCycle warning at 90%.
But it is still pre alpha testing, many things are still absent, and works only for 1.1.51 with alternative knock solution and warning light defined for a while.
