<code>
Planning VEMS 3.3 for turbocharging BMW M50B25 engine in an BMW E36.
Enigne Spec:
M50b25 without vanos
Je Forged Pistons Compression 8,1:0
MLS headgaskset 1,8mm
ARP headstuds
500cc injector
Preicison Turbo SC-44
Tial 38mm wastegate
50mm PPF blow-off.
600x300x75mm intercooler
Sachs heavy pressureplate
Walbro fuelpump
Primary trigger: Hall
Cam Trigger: Hall
Ordered the following 6/11-2005
1 x Assembled v3.3 controller (v3.3)
secondary_trigger HALL
primary_trigger HALL
PowerFlyback yes
MAP connection 400kPa onboard (6x4mm pneumatic)
ignition driver 6+2
Knock and EGT yes
LCD and PS2 yes
1 x Econoseal18-Wire
1 x EconoSeal36-Wire
3 x Injector connector pincount 2
3 x Injector connector pincount 3
1 x LCD4x20 (LCD4x20) Color blue
3 x VEMS sticker Color red
1 x EGT sensor (K-type) (2x90mm)
10 x K-compensational cable
1 x K-thermocouple connector Sex pair
4 x Temperature sensor
1 x Wideband O2 sensor (LSU4)
1 x Wideband connector With wire with crimped wires
1 x DSUBxx connector
</code>