| [Start] | [Engine] | [Trigger] | [Fuel] | [Ignition] | [Gallery] |
I`m located in Novi Sad,Serbia.
Installing VEMS Genboard v3.3 on M20B27 BMW engine.This is my first VEMS project,and first standalone project ever,so i would need all the help i can get! :) Tnx
News
26.09.2008.
The project is 99% done.Car is extremely fast at 0.85bar and the engine has survived several drift events since it's made for them :)
I experienced some detonations in 4th and 5th gear above 0.6bar even if i retarded the ignition previously for a 3-4deg.There is no signs on detonations in 1st,2nd and 3rd gear.Since the fuel is pretty low quality/octane (90 octane or even less) here in Serbia,i need to find a way to get some better quality fuel.
The car in a pic will attend one more drift event in October and after that we are swapping the engine into a full racing chassis.
Thanx Mattias for great help on many things! ;)
04.05.2008.
Engine has started! Cylinder head doesn't get any oil....and the oil in the turbo feed line is to weak,i can hold it closed with my finger without problems,so looks like the oil pressure is problem,probably oil pump is bad.
I will take some measurements of the oil pressure tomorrow and see what i will find out.
Looks like VEMS is working without any problems,i added Injector resistors since i`m using 55lb lowZ now...
01.05.2008.
Got almost everything done....I need to install fuel pump and some injector resistors and try to start the engine...
Pictures are [here]
06.03.2008.
- Turbo project is coming along together slowly,will add photos and info as soon as i start working something serious.
- Another VEMS project to come.My friend bought Honda Civic '90 1.6i 16v (D16A8 engine).More info [ here]
12.11.2007.
- After some problems with trigger setup (reversed polarity) i have started the engine.Engine is tuned mostly (using it for daily driving).
- TODO:
- Install IAC control
- Tune cold start (i need to hold throtle pedal for few mins)
- Tune high RPM's and loads
- Get it dyno tuned after everything is done
- TODO: