| [Start] | [Engine] | [Trigger] | [Fuel] | [Ignition] | [Gallery] |
Engine configuration (curently running on VEMS)
- m20b25 head
- m20b25 engine block shortened for 2,4mm
- m20b27 eta crank
- m20 rods 130mm
- m20b25 pistons (8.8:1 pistons from 325i Cat.)
- Schrick cam 288
- M50B20 injectors (same flow like stock bosch 715 injectors)
Dyno results with stock 173 motronic 159whp@6500 (MAT=??). Very reasonable, likely around 190 Hp crank (as in the book)
Dyno results with VEMS: TODO: provide logs of acceleration run(s) and data (most importantly mass, drivetrain, wheel) for LogAnalysis/PowerCompare
Planned turbocharged engine configuration
- b20 head with b25 valves,welded water channel,3 angle valve job
- b25 engine block
- 524TD crank
- 130mm rods
- Equal lenght tubular split pulse turbo manifold
- Huge FM intercooler
- 55lb injectors MSD/Halley
- Walbro 392gsl
- Schrick 288 cam
- 3x2 Wastedspark
- 50mm wastegate
- wbo2,EGT,knock
- ...