Firmware update tool (BootLoader) that does not require PERL (and support libraries).
Anyone had luck compiling megaloader for linux?
/utilities/megaloader/source$ make -f Linux_makefile.mak
Actually, it compiles and links fine, but:
./megaloader.bin -c /dev/ttyUSB0
Start terminal emulation - ESC to exit
and for keypress (even s or S) it exits.
Shoould it provide an ncurses interface ?
I haven't investigated it much. I guess in command-line mode it works well. (will try)
megaloader will download firmware into the AVR using
the same code sequences as the perl scripts. It uses
ncurses for a fairly complete VT100 terminal emulation.
The original thought was to use VT100 cursor positioning
commands in the maintenance screens and thereby make the
LCD optional.
See MembersPage/DavidHelland for documentation.
It does work, althought needed some source tweaks to compile depending on the GCC used. SVN has been updated.
See also