See also:
- EC36/pin26 can be used for knock gnd. (or any pin you request, eg. EC18/pin17)
- Knock2 is available on request, just request in the WebShop order note
- you can also request other special wiring, like serial port on endplate mounted DSUB9 female that gives you some extra pins for your favorite functions
Chart of Analog Inputs on page 2:
http://www.vems.hu/download/v3/doc/RescueKit.doc
The standard EC18 wiring (since 2009-09-29):
Please note that this is LSU4.2 pinout (pin1=nernst, pin5=pump-, ...), and LSU4.9 pinout has 7-x (pin6=nernst, pin2=pump- ...). Bosch made this change for unknown reason (which was not very nice), but consider this when wiring. See
[LSU4.9 product] and
See also