We're working on some firmware changes that allow VEMS v3.x => round data transfer.
Actually, maybe a separate (that has no wbo2 controller inside) round firmware that polls v3.x and displays lambda and EGT.
- Is it OK if it uses up the RS232 port ?
- That is, while you're tweaking v3.x with megatune, the round is unhooked (and does not show real values).
- This is a great compliment to the v3.3 ecu. I would like to have this feature as soon as possible to offer as an option. I have extra wires ran into the cabin for this reason. If you need a beta test, let me know/ KevinBlack
- Anybody waht to help work on this? I could have easily sold 5 gauges by now, and probably will sell more ECU when comm to round is done
- This is a great compliment to the v3.3 ecu. I would like to have this feature as soon as possible to offer as an option. I have extra wires ran into the cabin for this reason. If you need a beta test, let me know/ KevinBlack
- That is, while you're tweaking v3.x with megatune, the round is unhooked (and does not show real values).
Other functions
Besides the obvious display functions, some other useful functions could be used:
- button (LCD page-change?)
- 2 power outputs with flyback (60V FETs), max 5A (2..3A max recommended)
- external gnd referenced analog output
- RPM (wheelspeed), and maybe other data from round => v3.x
- Shift light (easy?) and or Boost gauge added. Boost display could be a ring of LEDs on the outside of the gauge face, maybe yellow with red as an overboost warning?/ KevinBlack