A couple of reports have come in from people who want to use AlphaN now that they have poor MAP signals due to long duration cams. It seems that they can never get their cars to idle particularly well. On further discussion it seems that the cause for this is that the IACV opens allowing more air in, but then there's no additional fuel added, so that the AF mixture goes lean and the idle gets progressively worse.
With our Speed density system, when the IACV opens, the pressure increases and the fueling and ignition requirements are better addressed.
As we tie the MAP value to TPS in our AlphaN system we need to model the same MAP pressure change when the IACV is opened.
Here's how I think it could be done.
Add an additional config entry IAC_OPEN_TPS_VALUE (%) which will be setup to equate to the equivalent change in throttle position that the IACV gives when open. The actual change would be dicatated by dividing IAC_OPEN_TPS_VALUE by theIAC position or duty.
So with an IAC_OPEN_TPS_VALUE of 4% when the IACV duty is 25% it will consider there to be a TPS opening value of 1%