Subpage of AfreshTiny
Disable AIM and basic display settings
After upgrading the firmware, start Megatune2.25 from the firmware's directory.
If the serial settings are correct Megatune said "Connected" in the bottom right corner.
- Disable AIM
- In Settings menu / Display Demo
- Set all bitmask for 255
- In Settings menu / Display Demo
- Basic display settings
- In Settings menu / Display settings
- Set Display Dim Time to 1 and Display Bright Time to D. That will cause the maximum light.
- The Units settings are to how the instrument shows the measured values.
- AIM: Aim input, set to Disabled
- In Settings menu / Display settings
- Display modes
- In Settings menu / Display Mode
- In this menu you can set what will the different slots are show. You can step to the next slot by pressing the button on the instrument.
- In Settings menu / Display Mode