My own street car. It works with VEMS since 2018.
- VEMS 3.8b (diy kit)
- firmware: 1.2.38
- hc-06 bluetooth (diy)
- 7 inch screen built in 1 din car audio
- Engine: 2.2 MC stock bottom end
- Cylinder head: OEM with ARP Head Studs, FCP springs, Inconel valves
- Camshaft: custom 272 lobe;
- Ignition: Audi TFSI COP
- Primary trigger: 60-2 VR(volvo 2 wire sensor) custom trigger
- Secondary trigger: OEM distributor with 1 teeth
Pinout:
- TPS GND black
5v+ ref pink
- CAM GND black
5v+ ref light red
- CLT GND blue
- MAT GND brown
- IDLE 12v+ red
- CRANK 5v+ ref grey/red
sensor GND black/white
- INJ1 12v+ yellow
- INJ2 12v+ yellow
- INJ3 12v+ yellow
- INJ4 12v+ yellow
- INJ5 12v+ yellow
- COIL1 12v+ red
SIGNAL green/black
gnd yellow
- COIL2 12v+ red
SIGNAL green/white
gnd yellow
- COIL3 12v+ red
SIGNAL green/red
gnd yellow
- COIL4 12v+ red
SIGNAL green/yellow
gnd yellow
- COIL5 12v+ red
SIGNAL green/brown
gnd yellow
- O2 4.9 ec18 pin9 red
ec18 pin13 black
ec18 pin18 white
15+ fused grey
- check/warning light output ec18 pin4 white (gnd)
- launch control input ec18 pin2 analog ch5 black(gnd)
MAIN RELAY
FUEL PUMP RELAY
The car runs great. Boost pressure is now 1.6 bar. Great power-band 3500-7000 rpm.
My goal is build one of the most powerful 10vt audi In hungary.