AUDI COUPE QUATTRO 10VT - VEMS wiki www.vems.hu

AUDI COUPE QUATTRO 10VT (2020-03-06 05:54:53)

My own street car. It works with VEMS since 2018.

VEMS 3.8b (diy kit)
- firmware: 1.2.38
- hc-06 bluetooth (diy)
- 7 inch screen built in 1 din car audio

Engine: 2.2 MC stock bottom end
- Cylinder head: OEM with ARP Head Studs, FCP springs, Inconel valves
- Camshaft: custom 272 lobe;
- Ignition: Audi TFSI COP
- Primary trigger: 60-2 VR(volvo 2 wire sensor) custom trigger
- Secondary trigger: OEM distributor with 1 teeth

Pinout:

TPS GND black

SIGNAL pink/white

5v+ ref pink

CAM GND black

SIGNAL pink/white

5v+ ref light red

CLT GND blue

SIGNAL blue/black

MAT GND brown

SIGNAL blue/yellow

IDLE 12v+ red

SIGNAL white

CRANK 5v+ ref grey/red

SIGNAL grey

sensor GND black/white

INJ1 12v+ yellow

SIGNAL yellow/grey

INJ2 12v+ yellow

SIGNAL yellow/brown

INJ3 12v+ yellow

SIGNAL yellow/purple

INJ4 12v+ yellow

SIGNAL yellow/red

INJ5 12v+ yellow

SIGNAL yellow/white

COIL1 12v+ red

sensor gnd black

SIGNAL green/black

gnd yellow

COIL2 12v+ red

sensor gnd black

SIGNAL green/white

gnd yellow

COIL3 12v+ red

sensor gnd black

SIGNAL green/red

gnd yellow

COIL4 12v+ red

sensor gnd black

SIGNAL green/yellow

gnd yellow

COIL5 12v+ red

sensor gnd black

SIGNAL green/brown

gnd yellow

O2 4.9 ec18 pin9 red

ec18 pin7 yellow

ec18 pin13 black

ec18 pin18 white

15+ fused grey

check/warning light output ec18 pin4 white (gnd)

launch control input ec18 pin2 analog ch5 black(gnd)

MAIN RELAY

FUEL PUMP RELAY