VEMS Home Products Documentation Wiki Webstore
WikiHome ProjectPage DocsPage UnderDevelopment MembersPage SiteIndex RecentChanges Preferences
History of VehicleFitment/Nissan
Older Newer
2015-01-01 07:00:00 . . . . MembersPage/MarcellGal [asked about idle valve]
2015-01-01 07:00:00 . . . . MembersPage/PhatBob [Test report - excellent]
2015-01-01 07:00:00 . . . . MembersPage/PhatBob [guessed settings for 24+1 trigger, please advise/correct]
2015-01-01 07:00:00 . . . . MembersPage/PhatBob [New trigger disks 24+1 made]
2015-01-01 07:00:00 . . . . MembersPage/PhatBob [Would the 1.1 trigger code work with this trigger pattern?]
2015-01-01 07:00:00 . . . . MembersPage/PhatBob [New CAS trigger design.]
2015-01-01 07:00:00 . . . . MembersPage/PhatBob [nissan ecu part numbers]
2015-01-01 07:00:00 . . . . MembersPage/PhatBob [Tested config initial test results are good]
2015-01-01 07:00:00 . . . . MembersPage/FredrikJagenheim [secondary_trigger 02 is the same as disable]
2015-01-01 07:00:00 . . . . MembersPage/PhatBob [request for secondary trigger advice]
2015-01-01 07:00:00 . . . . MembersPage/PhatBob [Trigger disks now in my hands - photos to prove it!]
2015-01-01 07:00:00 . . . . MembersPage/PhatBob [Corrected diagram link]
2015-01-01 07:00:00 . . . . MembersPage/PhatBob [More trigger details and final drawings]
2015-01-01 07:00:00 . . . . MembersPage/PhatBob [Laser cut Nissan 4 cylinder trigger disks now possible]
2015-01-01 07:00:00 . . . . MembersPage/PhatBob [new link]
2015-01-01 07:00:00 . . . . MembersPage/PhatBob [added S14 info]
2015-01-01 07:00:00 . . . . MembersPage/PhatBob
2005-08-15 07:13:24 . . . . MembersPage/FredrikJagenheim [Good page, wrong content]
2005-07-23 12:33:49 . . . . MembersPage/PhatBob
2015-01-01 07:00:00 . . . . MembersPage/PhatBob [Redrew trigger]
2015-01-01 07:00:00 . . . . MembersPage/PhatBob
2015-01-01 07:00:00 . . . . MembersPage/PhatBob [Put all the information collected on Nissan triggers so far.]

Changes by last author:

Changed:
Tested with 1.1.18 using the above settings, and it worked fine.
Tested with 1.1.18 using the above settings, and it worked fine. OK, great. Can you publish more detailed mcd dump? This would be some hint about the idle air-valve and the warmup enrichment requirements of the intake and engine (tables are too custom-setup-specific anyway, and h[1] and h[2] are already published above).