VEMS Home Products Documentation Wiki Webstore
WikiHome ProjectPage DocsPage UnderDevelopment MembersPage SiteIndex RecentChanges Preferences
History of MembersPage/Sascha/ModificationsandHelp
Older Newer
2016-11-05 10:22:25 . . . . catv-80-98-142-196.catv.broadband.hu [pins for 2nd RS232, and hints to verify]
2016-10-26 19:54:18 . . . . unallocated-static.rogers.com [Need info about 2nd COM port for AIM stream]
2013-11-06 10:19:32 . . . . catv-80-98-222-153.catv.broadband.hu [24+1 trigger hints]
2013-11-05 17:28:01 . . . . 64.229.245.27 [NSX trigger: 24+1 doesn't exist in configlet, possible to use Civic as base?]
2013-11-03 20:49:24 . . . . catv-80-98-222-153.catv.broadband.hu [MAT enrichment 100 is 100%, external lamba signal logging, etc...]
2013-11-01 15:00:05 . . . . 24-212-217-88.cable.teksavvy.com [Question about VEMS + external WB controller for EGO + Honda NSX trigger pattern]
2008-10-19 16:17:34 . . . . MembersPage/Sascha [added info about h[1]]
2008-10-08 22:01:37 . . . . MembersPage/Sascha [added questions about new MAT enrich... what defaults, and what scaleling?]
2008-06-29 18:21:09 . . . . MembersPage/Sascha [added 60-2 trigger info from GrmRacer]
2008-05-26 21:18:21 . . . . bas3-toronto46-1088812085.dsl.bell.ca [added GraphicalDisplay link]
2007-02-25 12:54:23 . . . . MembersPage/Sascha [added VW presson 60-2 wheel for crankshaft]
2006-08-30 19:56:29 . . . . CPE000d884367b2-CM013289901733.cpe.net.cable.rogers.com [update to help page]
2006-08-02 18:13:54 . . . . MembersPage/Sascha [new page, new information]

Changes by last author:

Changed:
OCT 26 2016
2nd COM wiring
Changed:
'2nd COM wiring
2nd COM port for live data (FW 1.2.35 and newer), 2nd RS232 3 pin (unpopulated header) towards the main processor:

* GND (easy to locate)

* TX (measures appr -7V when idle)

* RX (input, as an experiment pull to +5V with 1k resistor and it will follow to 3..4V perhaps).

Changed:
Looking to make use of the 2nd COM port for live data (FW 1.2.35 and newer), where do I find RX and TX for the 2nd port on the main board?
Located above the MAX232D (SOIC16) chip, different header, otherwise the same pinout as the 1st RS232 (which is towards the L293D stepper driver IC). See GenBoard/VerThree/Schematic
Changed:
Ref. link for AIM stream: http://www.vems.hu/wiki/index.php?page=BroadcastDatastreamAim
Ref. link for AIM stream: BroadcastDatastreamAim